Comparison of Different Elastic Strain Definitions for Largely Deformed SEI of Chemo-Mechanically Coupled Silicon Battery Particles

Amorphous silicon is a highly promising anode material for next-generation lithium-ion batteries. Large volume changes of the silicon particle have a critical effect on the surrounding solid-electrolyte interphase (SEI) due to repeated fracture and healing during cycling. Based on a thermodynamically consistent chemo-elasto-plastic continuum model we investigate the stress development inside the particle and the SEI. Using the example of a particle with SEI, we apply a higher order finite element method together with a variable-step, variable-order time integration scheme on a nonlinear system of partial differential equations. Starting from a single silicon particle setting, the surrounding SEI is added in a first step with the typically used elastic Green--St-Venant (GSV) strain definition for a purely elastic deformation. For this type of deformation, the definition of the elastic strain is crucial to get reasonable simulation results. In case of the elastic GSV strain, the simulation aborts. We overcome the simulation failure by using the definition of the logarithmic Hencky strain. However, the particle remains unaffected by the elastic strain definitions in the particle domain. Compared to GSV, plastic deformation with the Hencky strain is straightforward to take into account. For the plastic SEI deformation, a rate-independent and a rate-dependent plastic deformation are newly introduced and numerically compared for three half cycles for the example of a radial symmetric particle.