A Family of Interleaved High Step-Up DC-DC Converters by Integrating a Voltage Multiplier and an Active Clamp Circuits (2305.18241v1)

Abstract: A family of interleaved current-fed high step-up dc-dc converters are introduced and analyzed here by combining a voltage multiplier (VM) and an active clamp circuit for high-voltage high-power applications. Low input currents and output voltages ripples values and high voltage-gains characteristics of these converters make them suitable for lots of dc-dc applications. All power devices operate entirely under soft switching conditions, even when wide load and input voltage variations are applied. Thus, they can be designed at high switching frequencies to reduce passive components sizes to achieve high-power density, one of the main targets of the power electronics researches. Also, their input and output ports common ground simplifies the gate-drives and control circuits. To verify the given analyses and simulations, a 120-320 V to 1 kV, 50-1300 W three-stage two-leg prototype converter has been implemented at 100 kHz. Based on the experimental results, maximum efficiency of 96.5% is achieved.