Photonic Networks-on-Chip Employing Multilevel Signaling: A Cross-Layer Comparative Study (2110.06105v1)

Abstract: Photonic network-on-chip (PNoC) architectures employ photonic links with dense wavelength-division multiplexing (DWDM) to enable high throughput on-chip transfers. Unfortunately, increasing the DWDM degree (i.e., using a larger number of wavelengths) to achieve higher aggregated datarate in photonic links, and hence higher throughput in PNoCs, requires sophisticated and costly laser sources along with extra photonic hardware. This extra hardware can introduce undesired noise to the photonic link and increase the bit-error-rate (BER), power, and area consumption of PNoCs. To mitigate these issues, the use of 4-pulse amplitude modulation (4-PAM) signaling, instead of the conventional on-off keying (OOK) signaling, can halve the wavelength signals utilized in photonic links for achieving the target aggregate datarate while reducing the overhead of crosstalk noise, BER, and photonic hardware. There are various designs of 4- PAM modulators reported in the literature. For example, the signal superposition (SS), electrical digital-to-analog converter (EDAC), and optical digital-to-analog converter (ODAC) based designs of 4-PAM modulators have been reports. However, it is yet to be explored how these SS, EDAC, and ODAC based 4-PAM modulators can be utilized to design DWDM-based photonic links and PNoC architectures. In this paper, we provide an extensive link-level and system-level of the SS, EDAC, and ODAC types of 4-PAM modulators from prior work with regards to their applicability and utilization overheads. From our link-level and PNoC-level evaluation, we have observed that the 4-PAM EDAC based variants of photonic links and PNoCs exhibit better performance and energy-efficiency compared to the OOK, 4-PAM SS, and 4-PAM ODAC based links and PNoCs.